Rules of origin, explained: tariff shift, regional value content, and why 0% is earned per part
An FTA's 0% belongs to a part, not a country. How tariff-shift and regional value content rules work, what de minimis allows, why the importer carries the proof, and why one factory can pass one part and fail the next.
A free-trade agreement’s 0% rate is not a property of a country. It belongs to a part that meets the rule of origin written for its HTS heading, and the importer, not the factory, has to prove it at entry and for years afterward.
This post explains how those rules work in general terms: the two main tests, the small tolerance most agreements allow, who carries the burden of proof, and what the paperwork has to hold. It does not interpret any particular agreement. The rule for your part is read from the agreement’s own text for your heading. Where rules of origin sit in the wider choice of which origin to use for which part is covered in how to choose a sourcing origin per part.
Why the 0% carries so much weight
As of September 26, 2026, a part made outside China pays MFN plus 12.5% (10% for some economies) under the July 24 Section 301 action, unless it is FTA-qualifying. FTA-qualifying goods pay 0%: MFN is waived and the Section 301 layer does not apply. A part from an FTA partner that fails its rule pays MFN plus 10%. Section 232 metal goods are the exception to all of this; they pay 50% or 25% at any origin, and an FTA waives MFN but not Section 232.
Take the molded EPDM gasket we use as a standing example: HTS 4016.93.50 (MFN 2.5%, List 3), 120,000 units a year. The FTA-qualifying origin lands at $1.41 against $1.74 from China and nets $23,040 a year, 11%, after our fee. Rates are confirmed per HTS code.
All of that rests on the claim. If the rule is not met, the same part at the same $1.38 FOB pays MFN 2.5% plus 10%, about 17 cents a unit, and lands near $1.58. That is worse than the 12.5% origin’s $1.52, and only a few cents better than staying in China once the fee is added. The rule of origin is read before an FTA origin is shortlisted, not after the first shipment.
Test one: tariff shift
A tariff-shift rule asks whether the work done inside the agreement’s territory transformed the non-originating inputs into something classified differently. Every non-originating input has an HTSUS classification, and so does the finished part. If the inputs sit under a different classification from the finished good, at the level the rule names, the shift has happened.
The rule names the level. A change of chapter is the strictest: the inputs must come from a different two-digit chapter. A change of heading requires a different four-digit heading. A change of subheading requires only a different six-digit subheading.
Some rules add exceptions, written as “a change to this heading from any other heading, except from” a named heading. The exception stops a specific input, usually a near-finished one, from counting as transformed.
The rule is about classification, not effort. Molding a part from an imported compound usually changes the classification, because compound and finished part sit in different headings. Labeling and boxing an imported finished part does not.
Test two: regional value content
A regional value content rule asks how much of the part’s value originates inside the agreement’s territory. The agreement sets the formula and the threshold.
Two families of formula are common. A build-down starts from the part’s value and subtracts the value of non-originating materials. A build-up adds up the value of originating materials. Some agreements offer a choice of method, for example one based on the transaction value and one based on net cost, and some set different thresholds for each.
An illustration with round numbers, using a 50% threshold chosen for the arithmetic and not taken from any agreement. A part sells at $10.00. Non-originating materials, say a resin and an insert both shipped in from outside the territory, cost $6.00. Under a build-down, regional content is ($10.00 − $6.00) ÷ $10.00, or 40%, and the part fails. If the resin is resourced inside the territory and non-originating materials drop to $4.00, content becomes 60% and the part passes.
| Illustrative, round numbers | Before | After resin resourced |
|---|---|---|
| Part value | $10.00 | $10.00 |
| Non-originating materials | $6.00 | $4.00 |
| Regional value content (build-down) | 40% | 60% |
| Against an illustrative 50% threshold | Fails | Passes |
Two things follow. First, regional content moves with prices. If the factory cuts its price while imported input costs hold, the percentage falls, and a part that passed last year can fail this year. Second, the calculation runs on the factory’s costs, so the factory and its input suppliers have to cooperate with the file.
Many rules combine the two tests or offer them as alternatives. Read the exact rule for the heading.
Alongside both tests, most agreements include a de minimis provision. It lets a small share of non-originating material that fails the tariff-shift test be disregarded, so a part does not lose its preference because of one minor input. Each agreement sets its own tolerance, usually as a share of the part’s value and for some goods by weight, and some product sectors are carved out of it.
De minimis is a safety margin, not a plan. It rescues a part whose one small input missed the shift. It does not rescue a part whose main material came from outside the territory and never changed classification.
The importer carries the burden of proof
The preference is claimed by the importer at entry. The claim is a statement that the goods qualify, and the importer answers for it whether the information came from the factory, the agent or the broker.
CBP can ask for support for the claim after entry. If the support is not there, the preference is denied and the duty that should have been paid is owed. A claim the importer could not back can also carry penalties.
Depending on the agreement, a certification of origin is completed by the importer, the exporter or the producer. It identifies the goods, their classification and the rule they meet, and it is signed by someone who can stand behind it. The certification is not the proof. The proof is the records behind it, kept for the period the agreement and US customs law require, which runs to years rather than months. Those records are the traceability file:
- the bill of materials, with each input’s supplier, country of origin, HTS classification and cost;
- the rule for the finished part’s heading and which test was applied;
- the regional value calculation, where one applies, with the costs behind each figure;
- supplier declarations of origin for the originating inputs;
- purchase orders, invoices and production records that tie those inputs to the lots shipped.
The same input-by-input trace is most of what CBP’s UFLPA guidance expects an importer to be able to produce, which is a reason to build it once and keep it current. That separate regime, and why it is not a duty, is covered in UFLPA is not a tariff.
Why one factory qualifies one part and not the next
Because the rule is written per heading and measured per bill of materials, qualification belongs to the part, not the factory’s address.
Suppose a factory in an FTA-qualifying origin makes two parts for the same buyer. The first is molded from a compound bought under a different heading, so the tariff shift happens at the press. The second is an assembly whose main sub-assembly arrives already classified under the finished part’s heading. No shift happens, and the part must meet a regional value test that its imported content keeps it from reaching. Same factory, same buyer, same week. One part pays 0%. The other pays MFN plus 10%.
This is the sub-supply check from China plus one in practice: the five checks, seen from the paperwork side. It is also why a re-quote prices an FTA origin only after the rule for the heading has been read against the bill of materials, and why the answer can change when an input supplier changes.
What to do with this
- For each part you are considering moving, find the rule for its heading in the agreement’s text and note which test applies: tariff shift, regional value content or both.
- Build the bill of materials down to inputs, with origin, classification and cost, before any FTA origin goes on a shortlist. If the factory cannot supply that, price the part at MFN plus 10% until it can.
- Re-check the regional value calculation whenever the price or an input supplier changes, and run the result through the landed-cost calculator. Where the rule-of-origin screen sits in the re-quote is on the process page, and where FTA origins tend to win is on the nearshoring page.
Want this run on your parts? Send up to five SKUs and you’ll have a landed-cost comparison — China and other countries, named factories — in ten business days. No fee, no obligation.