Blog

What the tariff stack does to a real part, with a number.

Three guides, and the posts that go deeper on each: landed-cost math, origin decisions, and supplier quality from a distance. Every figure carries an as-of date.

Landed cost

Landed cost and tariffs

Read the full guide →
· 7 min

Does a 10% sourcing fee pay for itself? The math on the gasket and the enclosure

On the gasket, a 10% fee costs $16,560 a year against a $39,600 landed saving and nets $23,040. On the enclosure it eats all but two cents a unit, so the part stays put. The break-even rule, worked by tariff class.

· 7 min

How to run a part through a landed-cost calculator — and the five things it can't tell you

A landed-cost calculator sorts parts in minutes: twelve inputs, one per-unit table, one verdict. What each input means, where your number comes from, and the five things it cannot know, from HTS class to defect cost.

· 7 min

Freight per unit, not per container: how transit time and lot size change landed cost

A container rate is not a freight cost until it is divided by the units that fit, by cube and by weight. How to cost freight per unit, where LCL beats a full container, and what transit days and lot size cost in cash.

· 6 min

FOB vs. landed cost: the factory price is the number that matters least

In the gasket example FOB spans $1.20 to $1.38 while duty spans $0.48 to $0.00, and the dearest factory lands cheapest. What FOB covers, what landed and all-in cost add, and where supplier quote comparisons go wrong.

· 7 min

How to read your tariff stack by HTS code: List 1–3, List 4A, unlisted, and Section 232

A duty rate is a sum, not a country's number: Column 1 MFN, the China list rate (25%, 7.5% or none), the 12.5% July 24 layer, Section 232 on metal, and an FTA check. The gasket worked to 40.0%, as of September 26, 2026.

· 8 min

The June 8 Section 232 metals reset: when moving a metal part offshore is a wash

Since June 8, 2026, a part essentially all steel, aluminum or copper pays 50% Section 232 duty from every origin, a derivative 25%. The duty gap that pays for a move nearly vanishes; FOB, freight and metal content decide instead.

· 8 min

What the July 24 tariff change did to ten common parts

The 2026 Section 301 action took effect July 24: 12.5% on China and most other economies, 10% on the rest, 0% for FTA-qualifying goods. Here is the full duty stack on ten parts OEMs and brands actually buy — China against a 12.5% origin and an FTA-qualifying origin — with two rows worked all the way to landed cost.

Origins

Choosing an origin

Read the full guide →
· 6 min

UFLPA is not a tariff: detentions, traceability files, and what the July 24 action actually is

The July 24, 2026 action is a Section 301 duty of 12.5% or 10%. UFLPA is a CBP import ban enforced by detention and answered with a traceability file to raw material. Moving origin changes the duty, not the exposure.

· 6 min

The quarterly origin review: keeping a sourcing decision current as tariffs move

An origin decision is only as current as its rates. A six-step quarterly review per HTS line: re-pull rates, re-check Section 232 and the rule of origin, re-quote FOB, recompute landed cost, then stay, move or split.

· 6 min

How to qualify a second source without betting your tooling

A second source is real only if you own the tool and the incumbent ships while the new factory proves itself. Tooling title in writing, duplicate vs. transfer, six qualification gates, and dual-sourcing as a PO split.

· 7 min

China plus one in practice: the five checks that pick the second origin per HTS line

China plus one is decided per HTS line, not per country. Five checks pick the second origin for each part: duty stack, freight mode, sub-supply, rule of origin, Section 232. Worked on a gasket that moves and an enclosure that stays.

· 7 min

Rules of origin, explained: tariff shift, regional value content, and why 0% is earned per part

An FTA's 0% belongs to a part, not a country. How tariff-shift and regional value content rules work, what de minimis allows, why the importer carries the proof, and why one factory can pass one part and fail the next.

· 7 min

When China still wins: four kinds of part where moving costs more than it saves

Four kinds of part where a re-quote should say stay: Section 232 metals, deep-tooling parts, List 4A and unlisted headings, and cents-per-unit parts. The PP enclosure lands $2.77 from China and nets under 1% anywhere else.

· 6 min

Nearshoring vs. offshoring in 2026: the landed-cost math

Factory price is the number everyone compares and the least useful one. How to run the landed-cost comparison between China and other origins properly — duty per HTS code, freight, transit inventory, MOQ, tooling and the agent fee — with a molded gasket worked all the way through.

Quality

Supplier quality

Read the full guide →
· 9 min

AQL 2.5 / 4.0 explained for buyers: what a pre-shipment inspection does and doesn't guarantee

AQL is the worst process average a sampling plan will accept most of the time, not a defect-rate promise. How ANSI/ASQ Z1.4 turns lot size into a sample and an accept number, worked for 125- and 200-piece samples, and the three things a passed inspection does not tell you.

· 8 min

NNN vs. NDA: protecting drawings before the first RFQ

A US-style NDA covers disclosure and is silent on the two things a factory can actually do with your drawing: use it and go around you. What an NNN adds, why it should be governed by Chinese law in Chinese with a court where the assets are, and a clause checklist to take to counsel.

· 9 min

Sourcing agent vs. trading company: who holds title, who sets the price, who you can fire

A trading company buys from the factory and sells to you; an agent on a disclosed fee never takes title and you pay the factory directly. Why that one difference decides who sets your price, who owns the factory relationship, and when each model is the right call.

· 7 min

Golden samples and first-article inspection: how the tenth reorder matches the first

A golden sample fixes what the part looks like; a first-article report proves it matches the drawing. Who signs the sample, where its three copies live, what an AS9102-style FAI holds, and what triggers a new one.

· 7 min

What a 40-point factory audit actually checks, and what it can't

A 40-point audit tests whether a factory is real, owns its floor, controls its process and will last. What each group of checks looks for, the red flags, and why one day on site never replaces the FAI or inspection.

Free 10-day re-quote

Send us your top five SKUs. Get every viable origin back.

No commitment. In ten business days you’ll have a landed-cost comparison you can put in front of your CFO, with named factories behind every number.