Sourcing agent vs. trading company: who holds title, who sets the price, who you can fire
A trading company buys from the factory and sells to you; an agent on a disclosed fee never takes title and you pay the factory directly. Why that one difference decides who sets your price, who owns the factory relationship, and when each model is the right call.
The difference between a sourcing agent and a trading company is not service quality, and it is not honesty. It is one structural fact, who holds title to the goods between the factory and you, and almost everything a buyer cares about follows from it: who sets the price you see, whether you know which factory made the part, whose name is on the tooling, and what happens to the supply if you decide to change intermediaries.
This post lays out the two models side by side, with the in-house buying office as the third option, and says plainly where a trading company is the better answer. It sits inside the quality cluster because the intermediary structure decides who runs the inspection and whose interest it serves, which the supplier quality guide covers from the first audit to the sealed container.
Three ways to buy from a factory you have not visited
A trading company buys the goods from the factory and sells them to you. It is the seller on your commercial invoice. It sets the price, carries the goods on its books for however long it holds them, and earns the difference between what it paid and what you paid. It may run a factory of its own, or several, or none. Some present themselves as manufacturers, and one of the first things an on-site audit establishes is whether the address on the quote is a production floor or an office.
A sourcing agent does not buy anything. It finds and qualifies factories, runs the RFQ, negotiates on your behalf, and manages the account, and you contract with and pay the factory directly. The agent’s compensation is a fee you can see. In our case that is 10% of the FOB value on the factory’s commercial invoice, invoiced per purchase order and due net 30 from the inspection release, as the pricing page sets out. The factory is named to you under an NNN agreement before you ever place a PO.
An in-house office is your own staff in the country of manufacture: a sourcing manager, one or more quality engineers, maybe a logistics coordinator. You own every relationship outright and pay a fixed cost whether or not anything ships that month. It is the right structure at the volume where that fixed cost is smaller than an agent’s fee and the oversight it buys is needed every day. Below that volume it is an expensive way to have one person on the ground.
The comparison
| Trading company | Sourcing agent (disclosed fee) | In-house office | |
|---|---|---|---|
| Holds title to the goods | Yes, between factory and you | Never | No, you buy direct |
| Who you contract with | The trading company | The factory | The factory |
| Who you pay for goods | The trading company | The factory, at FOB | The factory |
| Price you see | Its selling price, margin inside | Factory FOB, fee invoiced separately | Factory FOB |
| Factory identity | Often undisclosed | Named, under NNN | Known |
| Tooling titled to | Varies; often the trading company | You, in the supply agreement | You |
| Compensation | Margin on each unit | 10% of FOB per PO (our terms) | Salaries and overhead, fixed |
| Inspection run by | Its own QC, or a third party you hire | The agent, included in the fee | Your staff |
| Scales with | Order count | FOB value | Headcount |
| If you leave | The factory relationship usually leaves with it | The factory, the NNN and the tooling stay with you | Nothing changes |
The rows are structural. A good trading company and a good agent will both show up at the factory, both read the first-article report, and both argue your side when a lot fails. The table is about what each is entitled to do and what you are entitled to know, not about who does the job well.
Who sets the price you see
When a trading company quotes $1.20, that number contains the factory’s price and the trading company’s margin, and you cannot separate them. That is not deception; it is how resale works. The consequence shows up later, when the price moves. A 6% increase arrives with a one-line explanation, resin or labor or freight, and you have no way to check which line moved or by how much, because you have never seen the factory’s invoice.
When an agent on a disclosed fee quotes, the FOB on the sheet is the factory’s own price, and the fee is a separate line. The 10% is visible, and it is not small. On some parts it will be more than a trading company would have made; on others, less. The difference is that you can see it, model it in a landed-cost comparison, and tell whether the saving at a new origin survives it. In the molded gasket example from our re-quote sheet, FOB at the best origin is $1.38 against $1.20 in China, the fee adds $0.14, and the part still lands 11% cheaper after the fee because the duty line is $0.48 against zero, as of September 26, 2026 and confirmed per HTS code in the re-quote. That arithmetic is only possible when every line is visible.
The second effect is on negotiation. A trading company negotiating with its factory is negotiating for its own margin. An agent negotiating with your factory is negotiating your price, because its fee is a fixed share of that price and the account is worth more to it than any single PO. Neither is virtue; both are structure.
Who you can fire
This is the question that matters most in year three, and it is easy to skip in week one.
With a trading company, the supply relationship belongs to the trading company. You may not know the factory’s name. The molds may be in the trading company’s name, or on its premises with no paper saying otherwise. If you decide to change intermediaries, you are also changing factories, re-tooling, and re-qualifying, which is a strong reason to stay in a relationship you would otherwise leave.
With an agent on a disclosed fee, the factory relationship is yours. You hold the contract with the factory, the tooling is titled to you in the supply agreement with photos and serial numbers, and the NNN runs between you and a named factory. Ending the agency is a change to the agreement, not a change of supplier. We put that in writing on purpose: an agent that can be replaced has to keep earning the account, and that is the incentive you want on the other side of the table. The FAQ covers how the tooling transfer procedure works if the work ever moves.
With an in-house office, there is nobody to fire except your own staff, which is the point of having one.
Where the quality incentive sits
A trading company that has paid the factory and taken title owns a rejected lot. That gives it a real incentive to get the goods right, and also a real incentive to ship a marginal lot rather than carry it. An agent that has never taken title owns nothing when a lot fails; the cost to it is time and a delayed fee, since ours is due from the inspection release, not the ship date. Its revenue comes from the next PO, which only arrives if the last one was right.
The practical difference is who reads the inspection report and who decides to release. Under the agent model described on our process page, the pre-shipment inspection report with photos goes to you before the container is loaded, and the shipment does not leave until you release it. The remediation policy, rework, replace or credit, is agreed with the factory in the supply agreement before the first PO, so a failed lot is handled by a procedure rather than a negotiation. A trading company can run the same discipline. The structural point is that under its model the report is addressed to it, because it is the buyer.
There is a compliance angle as well. CBP’s UFLPA guidance expects an importer to be able to trace its supply chain, and the duty rate follows where the goods were made, not who sold them. When the commercial invoice names a trading company and the factory is undisclosed, the traceability file and the origin analysis both begin with a gap you have to fill through the intermediary. When the factory is named and audited, they begin with the factory’s own records.
When a trading company is the right choice
A trading company is the better structure in several common cases, and a re-quote that pretends otherwise is not useful.
Very small orders. If your annual volume on a part family is below a factory’s MOQ, a trading company that aggregates demand across buyers can place the order and you cannot. Our own fee stops making sense below roughly $25,000 in annual FOB per part family, and the re-quote says so.
Consolidated mixed loads. If you buy thirty catalog SKUs from fifteen factories and want them in one container with one set of documents, a trading company that holds inventory and consolidates is doing something an agent does not do. We coordinate freight and documents but do not warehouse or consolidate stock.
One invoice, no factory relationship. Some buyers do not want a supply agreement with a factory, a tooling letter, or an inspection report to read. They want a product, a price, and a seller to call if it is wrong. That is a reasonable preference, and it describes a trading company.
Finished goods with no custom tooling and no drawing. If there is no IP to protect and no first article to approve, the main advantages of the agent model, a named factory under NNN and an inspection plan built on your spec, matter less.
The agent model earns its fee on custom OEM components and branded goods made to your drawing or your artwork, at volumes where a 10% fee is smaller than the gap between origins and the cost of a failed shipment. That is the work described on the China sourcing agent page, and the first thing it requires is a named factory and a signed NNN, which the post on NNN agreements versus NDAs takes up next.
What to do with this
- Find out who is on your current commercial invoices. If the seller is not the manufacturer, ask for the factory’s name and whether your molds are titled to you in writing. The answers tell you which model you are actually in.
- Decompose your last price increase. If you cannot say how much of it was the factory and how much was the intermediary, you are paying a margin you cannot see. That is not necessarily too much, but it is unknown.
- Match the model to the part. Catalog goods in small mixed lots: a trading company. Custom parts to your drawing above roughly $25,000 a year in FOB: an agent or, at much larger volume, your own office.
- Whichever you choose, insist on an audit before the first PO. The post on what a factory audit actually checks is the checklist, and it applies to a trading company’s factory as much as to a direct one.
Want this run on your parts? Send up to five SKUs and you’ll have a landed-cost comparison — China and other countries, named factories — in ten business days. No fee, no obligation.